Add Fedora 37

templates/Fedora/37/etc/dnf/protected.d/sudo.conf

@@ -0,0 +1 @@
+sudo

templates/Fedora/37/etc/pam.d/sudo

@@ -0,0 +1,7 @@
+#%PAM-1.0
+auth       include      system-auth
+account    include      system-auth
+password   include      system-auth
+session    optional     pam_keyinit.so revoke
+session    required     pam_limits.so
+session    include      system-auth

templates/Fedora/37/etc/pam.d/sudo-i

@@ -0,0 +1,6 @@
+#%PAM-1.0
+auth       include      sudo
+account    include      sudo
+password   include      sudo
+session    optional     pam_keyinit.so force revoke
+session    include      sudo

templates/Fedora/37/etc/sudo.conf

@@ -0,0 +1,139 @@
+#
+# Default /etc/sudo.conf file
+#
+# Sudo plugins:
+#   Plugin plugin_name plugin_path plugin_options ...
+#
+# The plugin_path is relative to /usr/libexec/sudo unless
+#   fully qualified.
+# The plugin_name corresponds to a global symbol in the plugin
+#   that contains the plugin interface structure.
+# The plugin_options are optional.
+#
+# The sudoers plugin is used by default if no Plugin lines are present.
+#Plugin sudoers_policy sudoers.so
+#Plugin sudoers_io sudoers.so
+#Plugin sudoers_audit sudoers.so
+
+#
+# Sudo askpass:
+#   Path askpass /path/to/askpass
+#
+# An askpass helper program may be specified to provide a graphical
+# password prompt for "sudo -A" support.  Sudo does not ship with its
+# own askpass program but can use the OpenSSH askpass.
+#
+# Use the OpenSSH askpass
+#Path askpass /usr/X11R6/bin/ssh-askpass
+#
+# Use the Gnome OpenSSH askpass
+#Path askpass /usr/libexec/openssh/gnome-ssh-askpass
+
+#
+# Sudo device search path:
+#   Path devsearch /dev/path1:/dev/path2:/dev
+#
+# A colon-separated list of paths to check when searching for a user's
+# terminal device.
+#
+#Path devsearch /dev/pts:/dev/vt:/dev/term:/dev/zcons:/dev/pty:/dev
+
+#
+# Sudo command interception:
+#   Path intercept /path/to/sudo_intercept.so
+#
+# Path to a shared library containing replacements for the execv(),
+# execve() and fexecve() library functions that perform a policy check
+# to verify the command is allowed and simply return an error if not.
+# This is used to implement the "intercept" functionality on systems that
+# support LD_PRELOAD or its equivalent.
+#
+# The compiled-in value is usually sufficient and should only be changed
+# if you rename or move the sudo_intercept.so file.
+#
+#Path intercept /usr/libexec/sudo/sudo_intercept.so
+
+#
+# Sudo noexec:
+#   Path noexec /path/to/sudo_noexec.so
+#
+# Path to a shared library containing replacements for the execv(),
+# execve() and fexecve() library functions that just return an error.
+# This is used to implement the "noexec" functionality on systems that
+# support LD_PRELOAD or its equivalent.
+#
+# The compiled-in value is usually sufficient and should only be changed
+# if you rename or move the sudo_noexec.so file.
+#
+#Path noexec /usr/libexec/sudo/sudo_noexec.so
+
+#
+# Sudo plugin directory:
+#   Path plugin_dir /path/to/plugins
+#
+# The default directory to use when searching for plugins that are
+# specified without a fully qualified path name.
+#
+#Path plugin_dir /usr/libexec/sudo
+
+#
+# Sudo developer mode:
+#   Set developer_mode true|false
+#
+# Allow loading of plugins that are owned by non-root or are writable
+# by "group" or "other".  Should only be used during plugin development.
+#Set developer_mode true
+
+#
+# Core dumps:
+#   Set disable_coredump true|false
+#
+# By default, sudo disables core dumps while it is executing (they
+# are re-enabled for the command that is run).
+# To aid in debugging sudo problems, you may wish to enable core
+# dumps by setting "disable_coredump" to false.
+#
+#Set disable_coredump false
+
+#
+# User groups:
+#   Set group_source static|dynamic|adaptive
+#
+# Sudo passes the user's group list to the policy plugin.
+# If the user is a member of the maximum number of groups (usually 16),
+# sudo will query the group database directly to be sure to include
+# the full list of groups.
+#
+# On some systems, this can be expensive so the behavior is configurable.
+# The "group_source" setting has three possible values:
+#   static   - use the user's list of groups returned by the kernel.
+#   dynamic  - query the group database to find the list of groups.
+#   adaptive - if user is in less than the maximum number of groups.
+#	       use the kernel list, else query the group database.
+#
+#Set group_source static
+
+#
+# Sudo interface probing:
+#   Set probe_interfaces true|false
+#
+# By default, sudo will probe the system's network interfaces and
+# pass the IP address of each enabled interface to the policy plugin.
+# On systems with a large number of virtual interfaces this may take
+# a noticeable amount of time.
+#
+#Set probe_interfaces false
+
+#
+# Sudo debug files:
+#   Debug program /path/to/debug_log subsystem@priority[,subsyste@priority]
+#
+# Sudo and related programs support logging debug information to a file.
+# The program is typically sudo, sudoers.so, sudoreplay, or visudo.
+#
+# Subsystems vary based on the program; "all" matches all subsystems.
+# Priority may be crit, err, warn, notice, diag, info, trace, or debug.
+# Multiple subsystem@priority may be specified, separated by a comma.
+#
+#Debug sudo /var/log/sudo_debug all@debug
+#Debug sudoers.so /var/log/sudoers_debug all@debug

templates/Fedora/37/etc/sudoers

@@ -0,0 +1,120 @@
+## Sudoers allows particular users to run various commands as
+## the root user, without needing the root password.
+##
+## Examples are provided at the bottom of the file for collections
+## of related commands, which can then be delegated out to particular
+## users or groups.
+## 
+## This file must be edited with the 'visudo' command.
+
+## Host Aliases
+## Groups of machines. You may prefer to use hostnames (perhaps using 
+## wildcards for entire domains) or IP addresses instead.
+# Host_Alias     FILESERVERS = fs1, fs2
+# Host_Alias     MAILSERVERS = smtp, smtp2
+
+## User Aliases
+## These aren't often necessary, as you can use regular groups
+## (ie, from files, LDAP, NIS, etc) in this file - just use %groupname 
+## rather than USERALIAS
+# User_Alias ADMINS = jsmith, mikem
+
+
+## Command Aliases
+## These are groups of related commands...
+
+## Networking
+# Cmnd_Alias NETWORKING = /sbin/route, /sbin/ifconfig, /bin/ping, /sbin/dhclient, /usr/bin/net, /sbin/iptables, /usr/bin/rfcomm, /usr/bin/wvdial, /sbin/iwconfig, /sbin/mii-tool
+
+## Installation and management of software
+# Cmnd_Alias SOFTWARE = /bin/rpm, /usr/bin/up2date, /usr/bin/yum
+
+## Services
+# Cmnd_Alias SERVICES = /sbin/service, /sbin/chkconfig, /usr/bin/systemctl start, /usr/bin/systemctl stop, /usr/bin/systemctl reload, /usr/bin/systemctl restart, /usr/bin/systemctl status, /usr/bin/systemctl enable, /usr/bin/systemctl disable
+
+## Updating the locate database
+# Cmnd_Alias LOCATE = /usr/bin/updatedb
+
+## Storage
+# Cmnd_Alias STORAGE = /sbin/fdisk, /sbin/sfdisk, /sbin/parted, /sbin/partprobe, /bin/mount, /bin/umount
+
+## Delegating permissions
+# Cmnd_Alias DELEGATING = /usr/sbin/visudo, /bin/chown, /bin/chmod, /bin/chgrp 
+
+## Processes
+# Cmnd_Alias PROCESSES = /bin/nice, /bin/kill, /usr/bin/kill, /usr/bin/killall
+
+## Drivers
+# Cmnd_Alias DRIVERS = /sbin/modprobe
+
+# Defaults specification
+
+#
+# Refuse to run if unable to disable echo on the tty.
+#
+Defaults   !visiblepw
+
+#
+# Preserving HOME has security implications since many programs
+# use it when searching for configuration files. Note that HOME
+# is already set when the the env_reset option is enabled, so
+# this option is only effective for configurations where either
+# env_reset is disabled or HOME is present in the env_keep list.
+#
+Defaults    always_set_home
+Defaults    match_group_by_gid
+
+# Prior to version 1.8.15, groups listed in sudoers that were not
+# found in the system group database were passed to the group
+# plugin, if any. Starting with 1.8.15, only groups of the form
+# %:group are resolved via the group plugin by default.
+# We enable always_query_group_plugin to restore old behavior.
+# Disable this option for new behavior.
+Defaults    always_query_group_plugin
+
+Defaults    env_reset
+Defaults    env_keep =  "COLORS DISPLAY HOSTNAME HISTSIZE KDEDIR LS_COLORS"
+Defaults    env_keep += "MAIL QTDIR USERNAME LANG LC_ADDRESS LC_CTYPE"
+Defaults    env_keep += "LC_COLLATE LC_IDENTIFICATION LC_MEASUREMENT LC_MESSAGES"
+Defaults    env_keep += "LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE"
+Defaults    env_keep += "LC_TIME LC_ALL LANGUAGE LINGUAS _XKB_CHARSET XAUTHORITY"
+
+#
+# Adding HOME to env_keep may enable a user to run unrestricted
+# commands via sudo.
+#
+# Defaults   env_keep += "HOME"
+
+Defaults    secure_path = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/var/lib/snapd/snap/bin
+
+## Next comes the main part: which users can run what software on 
+## which machines (the sudoers file can be shared between multiple
+## systems).
+## Syntax:
+##
+## 	user	MACHINE=COMMANDS
+##
+## The COMMANDS section may have other options added to it.
+##
+## Allow root to run any commands anywhere 
+root	ALL=(ALL) 	ALL
+
+## Allows members of the 'sys' group to run networking, software, 
+## service management apps and more.
+# %sys ALL = NETWORKING, SOFTWARE, SERVICES, STORAGE, DELEGATING, PROCESSES, LOCATE, DRIVERS
+
+## Allows people in group wheel to run all commands
+%wheel	ALL=(ALL)	ALL
+
+## Same thing without a password
+# %wheel	ALL=(ALL)	NOPASSWD: ALL
+
+## Allows members of the users group to mount and unmount the 
+## cdrom as root
+# %users  ALL=/sbin/mount /mnt/cdrom, /sbin/umount /mnt/cdrom
+
+## Allows members of the users group to shutdown this system
+# %users  localhost=/sbin/shutdown -h now
+
+## Read drop-in files from /etc/sudoers.d (the # here does not mean a comment)
+#includedir /etc/sudoers.d

templates/Fedora/37/etc/sudoers.d/session_log.j2

@@ -0,0 +1,6 @@
+#
+# {{ ansible_managed }}
+#
+Defaults log_input
+Defaults log_output
+

vars/Fedora-37-default.yml

@@ -0,0 +1,38 @@
+---
+# vars file for ensure_sudo
+package_list:
+  - name: 'libsss_sudo'
+    state: 'present'
+  - name: 'sudo'
+    state: 'present'
+template_list:
+  - dest: '/etc/dnf/protected.d/sudo.conf'
+    group: 'root'
+    mode: '0644'
+    owner: 'root'
+    src: '{{ ansible_distribution }}/{{ ansible_distribution_major_version }}/etc/dnf/protected.d/sudo.conf'
+  - dest: '/etc/pam.d/sudo'
+    group: 'root'
+    mode: '0644'
+    owner: 'root'
+    src: '{{ ansible_distribution }}/{{ ansible_distribution_major_version }}/etc/pam.d/sudo'
+  - dest: '/etc/pam.d/sudo-i'
+    group: 'root'
+    mode: '0644'
+    owner: 'root'
+    src: '{{ ansible_distribution }}/{{ ansible_distribution_major_version }}/etc/pam.d/sudo-i'
+  - dest: '/etc/sudo.conf'
+    group: 'root'
+    mode: '0640'
+    owner: 'root'
+    src: '{{ ansible_distribution }}/{{ ansible_distribution_major_version }}/etc/sudo.conf'
+  - dest: '/etc/sudoers'
+    group: 'root'
+    mode: '0440'
+    owner: 'root'
+    src: '{{ ansible_distribution }}/{{ ansible_distribution_major_version }}/etc/sudoers'
+  - dest: '/etc/sudoers.d/session_log'
+    group: 'root'
+    mode: '0440'
+    owner: 'root'
+    src: '{{ ansible_distribution }}/{{ ansible_distribution_major_version }}/etc/sudoers.d/session_log.j2'