From 29043741f754d18cf389f3a69f84dba6775676c6 Mon Sep 17 00:00:00 2001 From: Jason Rothstein Date: Tue, 6 Jul 2021 02:30:41 +0000 Subject: [PATCH] Enable clamd with OnAccess scanning --- templates/Fedora/34/etc/clamd.d/scan.conf | 796 ++++++++++++++++++++++ vars/Fedora-34-default.yml | 13 + 2 files changed, 809 insertions(+) create mode 100644 templates/Fedora/34/etc/clamd.d/scan.conf diff --git a/templates/Fedora/34/etc/clamd.d/scan.conf b/templates/Fedora/34/etc/clamd.d/scan.conf new file mode 100644 index 0000000..1d61a20 --- /dev/null +++ b/templates/Fedora/34/etc/clamd.d/scan.conf @@ -0,0 +1,796 @@ +## +## Example config file for the Clam AV daemon +## Please read the clamd.conf(5) manual before editing this file. +## + + +# Comment or remove the line below. +#Example + +# Uncomment this option to enable logging. +# LogFile must be writable for the user running daemon. +# A full path is required. +# Default: disabled +#LogFile /var/log/clamd.scan + +# By default the log file is locked for writing - the lock protects against +# running clamd multiple times (if want to run another clamd, please +# copy the configuration file, change the LogFile variable, and run +# the daemon with --config-file option). +# This option disables log file locking. +# Default: no +#LogFileUnlock yes + +# Maximum size of the log file. +# Value of 0 disables the limit. +# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes) +# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size +# in bytes just don't use modifiers. If LogFileMaxSize is enabled, log +# rotation (the LogRotate option) will always be enabled. +# Default: 1M +#LogFileMaxSize 2M + +# Log time with each message. +# Default: no +#LogTime yes + +# Also log clean files. Useful in debugging but drastically increases the +# log size. +# Default: no +#LogClean yes + +# Use system logger (can work together with LogFile). +# Default: no +LogSyslog yes + +# Specify the type of syslog messages - please refer to 'man syslog' +# for facility names. +# Default: LOG_LOCAL6 +#LogFacility LOG_MAIL + +# Enable verbose logging. +# Default: no +#LogVerbose yes + +# Enable log rotation. Always enabled when LogFileMaxSize is enabled. +# Default: no +#LogRotate yes + +# Enable Prelude output. +# Default: no +#PreludeEnable yes +# +# Set the name of the analyzer used by prelude-admin. +# Default: ClamAV +#PreludeAnalyzerName ClamAV + +# Log additional information about the infected file, such as its +# size and hash, together with the virus name. +#ExtendedDetectionInfo yes + +# This option allows you to save a process identifier of the listening +# daemon (main thread). +# This file will be owned by root, as long as clamd was started by root. +# It is recommended that the directory where this file is stored is +# also owned by root to keep other users from tampering with it. +# Default: disabled +#PidFile /run/clamd.scan/clamd.pid + +# Optional path to the global temporary directory. +# Default: system specific (usually /tmp or /var/tmp). +#TemporaryDirectory /var/tmp + +# Path to the database directory. +# Default: hardcoded (depends on installation options) +#DatabaseDirectory /var/lib/clamav + +# Only load the official signatures published by the ClamAV project. +# Default: no +#OfficialDatabaseOnly no + +# The daemon can work in local mode, network mode or both. +# Due to security reasons we recommend the local mode. + +# Path to a local socket file the daemon will listen on. +# Default: disabled (must be specified by a user) +#LocalSocket /run/clamd.scan/clamd.sock +LocalSocket /run/clamd.scan/clamd.sock + +# Sets the group ownership on the unix socket. +# Default: disabled (the primary group of the user running clamd) +#LocalSocketGroup virusgroup + +# Sets the permissions on the unix socket to the specified mode. +# Default: disabled (socket is world accessible) +#LocalSocketMode 660 + +# Remove stale socket after unclean shutdown. +# Default: yes +#FixStaleSocket yes + +# TCP port address. +# Default: no +#TCPSocket 3310 + +# TCP address. +# By default we bind to INADDR_ANY, probably not wise. +# Enable the following to provide some degree of protection +# from the outside world. This option can be specified multiple +# times if you want to listen on multiple IPs. IPv6 is now supported. +# Default: no +#TCPAddr 127.0.0.1 + +# Maximum length the queue of pending connections may grow to. +# Default: 200 +#MaxConnectionQueueLength 30 + +# Clamd uses FTP-like protocol to receive data from remote clients. +# If you are using clamav-milter to balance load between remote clamd daemons +# on firewall servers you may need to tune the options below. + +# Close the connection when the data size limit is exceeded. +# The value should match your MTA's limit for a maximum attachment size. +# Default: 25M +#StreamMaxLength 10M + +# Limit port range. +# Default: 1024 +#StreamMinPort 30000 +# Default: 2048 +#StreamMaxPort 32000 + +# Maximum number of threads running at the same time. +# Default: 10 +#MaxThreads 20 + +# Waiting for data from a client socket will timeout after this time (seconds). +# Default: 120 +#ReadTimeout 300 + +# This option specifies the time (in seconds) after which clamd should +# timeout if a client doesn't provide any initial command after connecting. +# Default: 30 +#CommandReadTimeout 30 + +# This option specifies how long to wait (in milliseconds) if the send buffer +# is full. +# Keep this value low to prevent clamd hanging. +# +# Default: 500 +#SendBufTimeout 200 + +# Maximum number of queued items (including those being processed by +# MaxThreads threads). +# It is recommended to have this value at least twice MaxThreads if possible. +# WARNING: you shouldn't increase this too much to avoid running out of file +# descriptors, the following condition should hold: +# MaxThreads*MaxRecursion + (MaxQueue - MaxThreads) + 6< RLIMIT_NOFILE (usual +# max is 1024). +# +# Default: 100 +#MaxQueue 200 + +# Waiting for a new job will timeout after this time (seconds). +# Default: 30 +#IdleTimeout 60 + +# Don't scan files and directories matching regex +# This directive can be used multiple times +# Default: scan all +#ExcludePath ^/proc/ +#ExcludePath ^/sys/ + +# Maximum depth directories are scanned at. +# Default: 15 +#MaxDirectoryRecursion 20 + +# Follow directory symlinks. +# Default: no +#FollowDirectorySymlinks yes + +# Follow regular file symlinks. +# Default: no +#FollowFileSymlinks yes + +# Scan files and directories on other filesystems. +# Default: yes +#CrossFilesystems yes + +# Perform a database check. +# Default: 600 (10 min) +#SelfCheck 600 + +# Enable non-blocking (multi-threaded/concurrent) database reloads. +# This feature will temporarily load a second scanning engine while scanning +# continues using the first engine. Once loaded, the new engine takes over. +# The old engine is removed as soon as all scans using the old engine have +# completed. +# This feature requires more RAM, so this option is provided in case users are +# willing to block scans during reload in exchange for lower RAM requirements. +# Default: yes +#ConcurrentDatabaseReload no + +# Execute a command when virus is found. In the command string %v will +# be replaced with the virus name. +# Default: no +#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v" + +# Run as another user (clamd must be started by root for this option to work) +# Default: don't drop privileges +User clamscan + +# Stop daemon when libclamav reports out of memory condition. +#ExitOnOOM yes + +# Don't fork into background. +# Default: no +#Foreground yes + +# Enable debug messages in libclamav. +# Default: no +#Debug yes + +# Do not remove temporary files (for debug purposes). +# Default: no +#LeaveTemporaryFiles yes + +# Permit use of the ALLMATCHSCAN command. If set to no, clamd will reject +# any ALLMATCHSCAN command as invalid. +# Default: yes +#AllowAllMatchScan no + +# Detect Possibly Unwanted Applications. +# Default: no +#DetectPUA yes + +# Exclude a specific PUA category. This directive can be used multiple times. +# See https://github.com/vrtadmin/clamav-faq/blob/master/faq/faq-pua.md for +# the complete list of PUA categories. +# Default: Load all categories (if DetectPUA is activated) +#ExcludePUA NetTool +#ExcludePUA PWTool + +# Only include a specific PUA category. This directive can be used multiple +# times. +# Default: Load all categories (if DetectPUA is activated) +#IncludePUA Spy +#IncludePUA Scanner +#IncludePUA RAT + +# This option causes memory or nested map scans to dump the content to disk. +# If you turn on this option, more data is written to disk and is available +# when the LeaveTemporaryFiles option is enabled. +#ForceToDisk yes + +# This option allows you to disable the caching feature of the engine. By +# default, the engine will store an MD5 in a cache of any files that are +# not flagged as virus or that hit limits checks. Disabling the cache will +# have a negative performance impact on large scans. +# Default: no +#DisableCache yes + +# In some cases (eg. complex malware, exploits in graphic files, and others), +# ClamAV uses special algorithms to detect abnormal patterns and behaviors that +# may be malicious. This option enables alerting on such heuristically +# detected potential threats. +# Default: yes +#HeuristicAlerts yes + +# Allow heuristic alerts to take precedence. +# When enabled, if a heuristic scan (such as phishingScan) detects +# a possible virus/phish it will stop scan immediately. Recommended, saves CPU +# scan-time. +# When disabled, virus/phish detected by heuristic scans will be reported only +# at the end of a scan. If an archive contains both a heuristically detected +# virus/phish, and a real malware, the real malware will be reported +# +# Keep this disabled if you intend to handle "*.Heuristics.*" viruses +# differently from "real" malware. +# If a non-heuristically-detected virus (signature-based) is found first, +# the scan is interrupted immediately, regardless of this config option. +# +# Default: no +#HeuristicScanPrecedence yes + + +## +## Heuristic Alerts +## + +# With this option clamav will try to detect broken executables (both PE and +# ELF) and alert on them with the Broken.Executable heuristic signature. +# Default: no +#AlertBrokenExecutables yes + +# With this option clamav will try to detect broken media file (JPEG, +# TIFF, PNG, GIF) and alert on them with a Broken.Media heuristic signature. +# Default: no +#AlertBrokenMedia yes + +# Alert on encrypted archives _and_ documents with heuristic signature +# (encrypted .zip, .7zip, .rar, .pdf). +# Default: no +#AlertEncrypted yes + +# Alert on encrypted archives with heuristic signature (encrypted .zip, .7zip, +# .rar). +# Default: no +#AlertEncryptedArchive yes + +# Alert on encrypted archives with heuristic signature (encrypted .pdf). +# Default: no +#AlertEncryptedDoc yes + +# With this option enabled OLE2 files containing VBA macros, which were not +# detected by signatures will be marked as "Heuristics.OLE2.ContainsMacros". +# Default: no +#AlertOLE2Macros yes + +# Alert on SSL mismatches in URLs, even if the URL isn't in the database. +# This can lead to false positives. +# Default: no +#AlertPhishingSSLMismatch yes + +# Alert on cloaked URLs, even if URL isn't in database. +# This can lead to false positives. +# Default: no +#AlertPhishingCloak yes + +# Alert on raw DMG image files containing partition intersections +# Default: no +#AlertPartitionIntersection yes + + +## +## Executable files +## + +# PE stands for Portable Executable - it's an executable file format used +# in all 32 and 64-bit versions of Windows operating systems. This option +# allows ClamAV to perform a deeper analysis of executable files and it's also +# required for decompression of popular executable packers such as UPX, FSG, +# and Petite. If you turn off this option, the original files will still be +# scanned, but without additional processing. +# Default: yes +#ScanPE yes + +# Certain PE files contain an authenticode signature. By default, we check +# the signature chain in the PE file against a database of trusted and +# revoked certificates if the file being scanned is marked as a virus. +# If any certificate in the chain validates against any trusted root, but +# does not match any revoked certificate, the file is marked as whitelisted. +# If the file does match a revoked certificate, the file is marked as virus. +# The following setting completely turns off authenticode verification. +# Default: no +#DisableCertCheck yes + +# Executable and Linking Format is a standard format for UN*X executables. +# This option allows you to control the scanning of ELF files. +# If you turn off this option, the original files will still be scanned, but +# without additional processing. +# Default: yes +#ScanELF yes + + +## +## Documents +## + +# This option enables scanning of OLE2 files, such as Microsoft Office +# documents and .msi files. +# If you turn off this option, the original files will still be scanned, but +# without additional processing. +# Default: yes +#ScanOLE2 yes + +# This option enables scanning within PDF files. +# If you turn off this option, the original files will still be scanned, but +# without decoding and additional processing. +# Default: yes +#ScanPDF yes + +# This option enables scanning within SWF files. +# If you turn off this option, the original files will still be scanned, but +# without decoding and additional processing. +# Default: yes +#ScanSWF yes + +# This option enables scanning xml-based document files supported by libclamav. +# If you turn off this option, the original files will still be scanned, but +# without additional processing. +# Default: yes +#ScanXMLDOCS yes + +# This option enables scanning of HWP3 files. +# If you turn off this option, the original files will still be scanned, but +# without additional processing. +# Default: yes +#ScanHWP3 yes + + +## +## Mail files +## + +# Enable internal e-mail scanner. +# If you turn off this option, the original files will still be scanned, but +# without parsing individual messages/attachments. +# Default: yes +#ScanMail yes + +# Scan RFC1341 messages split over many emails. +# You will need to periodically clean up $TemporaryDirectory/clamav-partial +# directory. +# WARNING: This option may open your system to a DoS attack. +# Never use it on loaded servers. +# Default: no +#ScanPartialMessages yes + +# With this option enabled ClamAV will try to detect phishing attempts by using +# HTML.Phishing and Email.Phishing NDB signatures. +# Default: yes +#PhishingSignatures no + +# With this option enabled ClamAV will try to detect phishing attempts by +# analyzing URLs found in emails using WDB and PDB signature databases. +# Default: yes +#PhishingScanURLs no + + +## +## Data Loss Prevention (DLP) +## + +# Enable the DLP module +# Default: No +#StructuredDataDetection yes + +# This option sets the lowest number of Credit Card numbers found in a file +# to generate a detect. +# Default: 3 +#StructuredMinCreditCardCount 5 + +# With this option enabled the DLP module will search for valid Credit Card +# numbers only. Debit and Private Label cards will not be searched. +# Default: no +#StructuredCCOnly yes + +# This option sets the lowest number of Social Security Numbers found +# in a file to generate a detect. +# Default: 3 +#StructuredMinSSNCount 5 + +# With this option enabled the DLP module will search for valid +# SSNs formatted as xxx-yy-zzzz +# Default: yes +#StructuredSSNFormatNormal yes + +# With this option enabled the DLP module will search for valid +# SSNs formatted as xxxyyzzzz +# Default: no +#StructuredSSNFormatStripped yes + + +## +## HTML +## + +# Perform HTML normalisation and decryption of MS Script Encoder code. +# Default: yes +# If you turn off this option, the original files will still be scanned, but +# without additional processing. +#ScanHTML yes + + +## +## Archives +## + +# ClamAV can scan within archives and compressed files. +# If you turn off this option, the original files will still be scanned, but +# without unpacking and additional processing. +# Default: yes +#ScanArchive yes + + +## +## Limits +## + +# The options below protect your system against Denial of Service attacks +# using archive bombs. + +# This option sets the maximum amount of time to a scan may take. +# In this version, this field only affects the scan time of ZIP archives. +# Value of 0 disables the limit. +# Note: disabling this limit or setting it too high may result allow scanning +# of certain files to lock up the scanning process/threads resulting in a +# Denial of Service. +# Time is in milliseconds. +# Default: 120000 +#MaxScanTime 300000 + +# This option sets the maximum amount of data to be scanned for each input +# file. Archives and other containers are recursively extracted and scanned +# up to this value. +# Value of 0 disables the limit +# Note: disabling this limit or setting it too high may result in severe damage +# to the system. +# Default: 100M +#MaxScanSize 150M + +# Files larger than this limit won't be scanned. Affects the input file itself +# as well as files contained inside it (when the input file is an archive, a +# document or some other kind of container). +# Value of 0 disables the limit. +# Note: disabling this limit or setting it too high may result in severe damage +# to the system. +# Technical design limitations prevent ClamAV from scanning files greater than +# 2 GB at this time. +# Default: 25M +#MaxFileSize 30M + +# Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR +# file, all files within it will also be scanned. This options specifies how +# deeply the process should be continued. +# Note: setting this limit too high may result in severe damage to the system. +# Default: 16 +#MaxRecursion 10 + +# Number of files to be scanned within an archive, a document, or any other +# container file. +# Value of 0 disables the limit. +# Note: disabling this limit or setting it too high may result in severe damage +# to the system. +# Default: 10000 +#MaxFiles 15000 + +# Maximum size of a file to check for embedded PE. Files larger than this value +# will skip the additional analysis step. +# Note: disabling this limit or setting it too high may result in severe damage +# to the system. +# Default: 10M +#MaxEmbeddedPE 10M + +# Maximum size of a HTML file to normalize. HTML files larger than this value +# will not be normalized or scanned. +# Note: disabling this limit or setting it too high may result in severe damage +# to the system. +# Default: 10M +#MaxHTMLNormalize 10M + +# Maximum size of a normalized HTML file to scan. HTML files larger than this +# value after normalization will not be scanned. +# Note: disabling this limit or setting it too high may result in severe damage +# to the system. +# Default: 2M +#MaxHTMLNoTags 2M + +# Maximum size of a script file to normalize. Script content larger than this +# value will not be normalized or scanned. +# Note: disabling this limit or setting it too high may result in severe damage +# to the system. +# Default: 5M +#MaxScriptNormalize 5M + +# Maximum size of a ZIP file to reanalyze type recognition. ZIP files larger +# than this value will skip the step to potentially reanalyze as PE. +# Note: disabling this limit or setting it too high may result in severe damage +# to the system. +# Default: 1M +#MaxZipTypeRcg 1M + +# This option sets the maximum number of partitions of a raw disk image to be +# scanned. +# Raw disk images with more partitions than this value will have up to +# the value number partitions scanned. Negative values are not allowed. +# Note: setting this limit too high may result in severe damage or impact +# performance. +# Default: 50 +#MaxPartitions 128 + +# This option sets the maximum number of icons within a PE to be scanned. +# PE files with more icons than this value will have up to the value number +# icons scanned. +# Negative values are not allowed. +# WARNING: setting this limit too high may result in severe damage or impact +# performance. +# Default: 100 +#MaxIconsPE 200 + +# This option sets the maximum recursive calls for HWP3 parsing during +# scanning. HWP3 files using more than this limit will be terminated and +# alert the user. +# Scans will be unable to scan any HWP3 attachments if the recursive limit +# is reached. +# Negative values are not allowed. +# WARNING: setting this limit too high may result in severe damage or impact +# performance. +# Default: 16 +#MaxRecHWP3 16 + +# This option sets the maximum calls to the PCRE match function during +# an instance of regex matching. +# Instances using more than this limit will be terminated and alert the user +# but the scan will continue. +# For more information on match_limit, see the PCRE documentation. +# Negative values are not allowed. +# WARNING: setting this limit too high may severely impact performance. +# Default: 100000 +#PCREMatchLimit 20000 + +# This option sets the maximum recursive calls to the PCRE match function +# during an instance of regex matching. +# Instances using more than this limit will be terminated and alert the user +# but the scan will continue. +# For more information on match_limit_recursion, see the PCRE documentation. +# Negative values are not allowed and values > PCREMatchLimit are superfluous. +# WARNING: setting this limit too high may severely impact performance. +# Default: 2000 +#PCRERecMatchLimit 10000 + +# This option sets the maximum filesize for which PCRE subsigs will be +# executed. Files exceeding this limit will not have PCRE subsigs executed +# unless a subsig is encompassed to a smaller buffer. +# Negative values are not allowed. +# Setting this value to zero disables the limit. +# WARNING: setting this limit too high or disabling it may severely impact +# performance. +# Default: 25M +#PCREMaxFileSize 100M + +# When AlertExceedsMax is set, files exceeding the MaxFileSize, MaxScanSize, or +# MaxRecursion limit will be flagged with the virus +# "Heuristics.Limits.Exceeded". +# Default: no +#AlertExceedsMax yes + +## +## On-access Scan Settings +## + +# Don't scan files larger than OnAccessMaxFileSize +# Value of 0 disables the limit. +# Default: 5M +#OnAccessMaxFileSize 10M + +# Max number of scanning threads to allocate to the OnAccess thread pool at +# startup. These threads are the ones responsible for creating a connection +# with the daemon and kicking off scanning after an event has been processed. +# To prevent clamonacc from consuming all clamd's resources keep this lower +# than clamd's max threads. +# Default: 5 +#OnAccessMaxThreads 10 + +# Max amount of time (in milliseconds) that the OnAccess client should spend +# for every connect, send, and recieve attempt when communicating with clamd +# via curl. +# Default: 5000 (5 seconds) +# OnAccessCurlTimeout 10000 + +# Toggles dynamic directory determination. Allows for recursively watching +# include paths. +# Default: no +#OnAccessDisableDDD yes + +# Set the include paths (all files inside them will be scanned). You can have +# multiple OnAccessIncludePath directives but each directory must be added +# in a separate line. +# Default: disabled +#OnAccessIncludePath /home +#OnAccessIncludePath /students + +# Set the exclude paths. All subdirectories are also excluded. +# Default: disabled +#OnAccessExcludePath /home/user + +# Modifies fanotify blocking behaviour when handling permission events. +# If off, fanotify will only notify if the file scanned is a virus, +# and not perform any blocking. +# Default: no +#OnAccessPrevention yes + +# When using prevention, if this option is turned on, any errors that occur +# during scanning will result in the event attempt being denied. This could +# potentially lead to unwanted system behaviour with certain configurations, +# so the client defaults this to off and prefers allowing access events in +# case of scan or connection error. +# Default: no +#OnAccessDenyOnError yes + +# Toggles extra scanning and notifications when a file or directory is +# created or moved. +# Requires the DDD system to kick-off extra scans. +# Default: no +#OnAccessExtraScanning yes + +# Set the mount point to be scanned. The mount point specified, or the mount +# point containing the specified directory will be watched. If any directories +# are specified, this option will preempt (disable and ignore all options +# related to) the DDD system. This option will result in verdicts only. +# Note that prevention is explicitly disallowed to prevent common, fatal +# misconfigurations. (e.g. watching "/" with prevention on and no exclusions +# made on vital system directories) +# It can be used multiple times. +# Default: disabled +#OnAccessMountPath / +#OnAccessMountPath /home/user + +# With this option you can whitelist the root UID (0). Processes run under +# root with be able to access all files without triggering scans or +# permission denied events. +# Note that if clamd cannot check the uid of the process that generated an +# on-access scan event (e.g., because OnAccessPrevention was not enabled, and +# the process already exited), clamd will perform a scan. Thus, setting +# OnAccessExcludeRootUID is not *guaranteed* to prevent every access by the +# root user from triggering a scan (unless OnAccessPrevention is enabled). +# Default: no +#OnAccessExcludeRootUID no + +# With this option you can whitelist specific UIDs. Processes with these UIDs +# will be able to access all files without triggering scans or permission +# denied events. +# This option can be used multiple times (one per line). +# Using a value of 0 on any line will disable this option entirely. +# To whitelist the root UID (0) please enable the OnAccessExcludeRootUID +# option. +# Also note that if clamd cannot check the uid of the process that generated an +# on-access scan event (e.g., because OnAccessPrevention was not enabled, and +# the process already exited), clamd will perform a scan. Thus, setting +# OnAccessExcludeUID is not *guaranteed* to prevent every access by the +# specified uid from triggering a scan (unless OnAccessPrevention is enabled). +# Default: disabled +#OnAccessExcludeUID -1 + +# This option allows exclusions via user names when using the on-access +# scanning client. It can be used multiple times. +# It has the same potential race condition limitations of the +# OnAccessExcludeUID option. +# Default: disabled +#OnAccessExcludeUname clamav +OnAccessExcludeUname clamilt +OnAccessExcludeUname clamscan +OnAccessExcludeUname clamupdate + +# Number of times the OnAccess client will retry a failed scan due to +# connection problems (or other issues). +# Default: 0 +#OnAccessRetryAttempts 3 + +## +## Bytecode +## + +# With this option enabled ClamAV will load bytecode from the database. +# It is highly recommended you keep this option on, otherwise you'll miss +# detections for many new viruses. +# Default: yes +#Bytecode yes + +# Set bytecode security level. +# Possible values: +# None - No security at all, meant for debugging. +# DO NOT USE THIS ON PRODUCTION SYSTEMS. +# This value is only available if clamav was built +# with --enable-debug! +# TrustSigned - Trust bytecode loaded from signed .c[lv]d files, insert +# runtime safety checks for bytecode loaded from other sources. +# Paranoid - Don't trust any bytecode, insert runtime checks for all. +# Recommended: TrustSigned, because bytecode in .cvd files already has these +# checks. +# Note that by default only signed bytecode is loaded, currently you can only +# load unsigned bytecode in --enable-debug mode. +# +# Default: TrustSigned +#BytecodeSecurity TrustSigned + +# Allow loading bytecode from outside digitally signed .c[lv]d files. +# **Caution**: You should NEVER run bytecode signatures from untrusted sources. +# Doing so may result in arbitrary code execution. +# Default: no +#BytecodeUnsigned yes + +# Set bytecode timeout in milliseconds. +# +# Default: 5000 +# BytecodeTimeout 1000 diff --git a/vars/Fedora-34-default.yml b/vars/Fedora-34-default.yml index f7e03bd..32f45df 100644 --- a/vars/Fedora-34-default.yml +++ b/vars/Fedora-34-default.yml @@ -11,11 +11,24 @@ package_list: state: 'present' - name: 'clamav-update' state: 'present' + - name: 'clamd' + state: 'present' service_list: + - name: 'clamav-clamonacc.service' + state: 'started' + enabled: 'yes' - name: 'clamav-freshclam.service' state: 'started' enabled: 'yes' + - name: 'clamd@scan.service' + state: 'started' + enabled: 'yes' template_list: + - dest: '/etc/clamd.d/scan.conf' + group: 'root' + mode: '0644' + owner: 'root' + src: '{{ ansible_distribution }}/{{ ansible_distribution_major_version }}/etc/clamd.d/scan.conf' - dest: '/etc/freshclam.conf' group: 'root' mode: '0600'